|
AUTOMATIC RIGID FOAM CUTTING LINE
 |
 |
 |
| Year | 2003 |
| Information | Automatic Rigid Foam Cutting Line for rigid foam PIR foam blocks to be cut into sheets. |
| Block length: | 2000 mm minimum up to 4500 mm maximum |
| Block width: | 750
mm minimum up to 1300 mm maximum |
| Block height: | Up to 1300 mm maximum |
| Minimum sheet thickness: | 20 mm |
| Production output: | Up to four (4) blocks per hour de-skinned and sheet cut. |
| Equipment detail 1. | Two x Side Skin Trimming Units, each equipped with continuous saw toothed blades, with driven adjustment for positioning. |
|
Cutting width max.: |
1300 mm |
|
Cutting width min.: |
750 mm |
| Equipment detail 2. | One x End Trim Cutting Unit, equipped with continuous saw toothed lade, foam block clamps and optical block length sensor to determine cut position. |
| Equipment detail 3. | One x Horizontal Stack and Slitting Machine, with continuous saw toothed blade with saw guidance system. |
| Equipment detail 4. | One x Twin Infeed and Outfeed Driven Belt Base Conveyor Unit, with variable speed adjustment and including the provision for the possible later addition of motor driven sidewalls with motor driven width adjustment. |
|
Conveyor speed max.: |
20 mtr./min. |
|
Nominal conveyor length: |
11, 2 mtr. |
| Equipment detail 5. | One x Fixed Side Datum Fence for block alignment and positioning, fitted to the right hand side of the cutting line. |
| Equipment detail 6. | One x Variable Height Top Weight Plate to apply even weight distribution to the foam blocks during final sheet trimming. |
| Control system | Siemens PLC and HMI with software for fully automatic block trimming and sheeting, as well as re-trimming of the final sheets. |
| Dust extraction | Dust
extraction points are located around the machine for connection to the
customer’s existing extraction system. |
| Electrical supply | 380 V / 50 Hz |
| Comments | New machine available for short term delivery. Can be demonstrated. Information without obligation, offers on request. |
